QIDI Tech ABS-GF25 Glass Fiber Filament High Speed Rapido ABS Filament Odorless

QIDI TECH Glass Fiber ABS 3D Printer Filament 1.75mm
Containing 25% Glass Fiber
QIDI TECH UltraABS-GF25 is specially developed for FDM 3D printing process with smoother surfaces, low moisture absorption, high interlayer bond strength and high heat resistance. With good dimensional stability, no warpage and no shrinkage, no heating chamber are required during the printing process.

Why Choose Glass Fiber Reinforced ABS Material?
- QIDI TECH UltraABS-GF25 is a new ABS-GF type filament with a double-layer structure. QIDI TECH has increased the glass fiber content of ABS-GF to 25%.
- QIDI TECH has completely upgraded this filament by wrapping a layer of high bond strength pure ABS resin on its surface, with an average thickness of about 0.03mm on the outer layer.
- These upgrades not only retain the original frosting and anti-warping properties of ABS-GF material, but also further improve the interlayer bonding performance of the material and solve the problem of weakened interlayer strength of ABS-GF filaments.

Recommended printing parameters
Material: UltraABS-GF25
Net weight: 1kg(2.2lbs)
Nozzle Temp: 250-270°C
Printing Speed: 40-200mm/s
Bed Temp: 100-110°C
Chamber Temp: 40-50°C
Fan: OFF

Qidi Odorless-ABS Rapido Filament
Qidi Tech Odorless-ABS Rapido Filament is an ABS-based filament specially developed for 3D printing. Compared with other ABS filaments, it has a much lower odor and excellent mechanical properties. QIDI Tech ABS is a high-strength ABS-based 3D printing filament with outstanding mechanical properties. The tensile strength of its 3D printed parts in the XY axis direction can be close to 40MPa. Therefore, QIDI Tech ABS is ideal for printing functional prototypes, jigs and low-volume production parts. QIDI Tech ABS can be used together with QIDI S-White Quick-Remove Support Material to solve the poor surface of complex model above supports.

Recommended printing conditions
Material: Odorless-ABS Rapido Filament
Net weight: 1kg(2.2lbs)
Nozzle Temp: 250-270°C
Printing Speed: 40-200mm/s
Bed Temp: 100-110°C
Cooling Fan Speed: OFF