Power Central lifepo4 BMS 12v 24v 36v 48v 30a 60a 100a 4s 8s 12s 16s 3.2v Manufactured by Daly

Noted

- all are now with Temp sensor except the 12s

- we put our logo on the daly bms for the 1 year warranty support

Variation

4S 12V Discharge 30A Charge 15A lifepo4 bms, same port

4S 12V Discharge 60A Charge 30A lifepo4 bms, same port

4S 12V Discharge 100A Charge 50A lifepo4 bms, same port

8S 24V Discharge 30A Charge 15A lifepo4 bms, same port

8S 24V Discharge 60A Charge 30A lifepo4 bms, same port

8S 24V Discharge 100A Charge 50A lifepo4 bms, same port

12S 36V Discharge 30A Charge 15A lifepo4 bms, same port

12S 36V Discharge 60A Charge 30A lifepo4 bms, same port

12S 36V Discharge 100A Charge 50A lifepo4 bms, same port

16S 48V Discharge 30A Charge 15A lifepo4 bms, same port

16S 48V Discharge 60A Charge 30A lifepo4 bms, same port

16S 48V Discharge 100A Charge 50A lifepo4 bms, same port

included in the box

BMS x 1

balance wire x 1

Description

- Use top quality (A-level) protective integrated circuit IC, from the solution of Japan.

- Strong load ability, constant discharge current 30A 60A 100A, use high voltage resistance

- inner resistance power Mosfet. The heat sink will greatly help cooling.

- IC itself has power balancing function. The circuit is simple and reliable.

- Typical voltage detection for each cell. So each battery will be prevented over charged or over discharged. Over current and short circuit protection function is very reliable.Long time short circuit of the load won't affect the PCB and the battery

- Extreme low power consumption. The consumption of the whole device is less than 50uA.

- PCB use high anti-corrosion, high water resistance, high impedance ESD conformal Coating

specification

Over Charge Detection Voltage: 3.75±0.05V

Over Charge Detection Delay Time: 0.5S

Over Charge Release Voltage: 3.55±0.05V

Cell balancing Detection Voltage: 3.5V

Cell balancing Release Voltage: 3.5V

Cell balancing Current: 30±5mA

Over Discharge Detection Voltage: 2.2±0.05V

Over Discharge Detection Delay Time: 0.5S

Over Discharge Release Voltage: 2.7±0.05V

Over Current Protection Condition: Disconnect the load

Detection Condition: Exterior Short Circuit

Detection Delay Time: 250uS

Release Condition: Disconnect the load