KINGROON 500g Photosensitive Resin LCD SLA 3D Printer 405nm UV Resin 3D Printing Material For KP6 Mario

For LCD

Specifically designed for LCD light source to achieve better printing quality.

Save notes:

It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.

Precautions:

This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.

Terms and Conditions:

Shake well before use,please wear a glove mask,the recommended temperature 20-25 ℃, to avoid dust and the environment.

Specification:

♦ Hardness: 84D
♦ Viscosity(25℃): 150-250 mpa.s
♦ Curing wavelength: 405 nm
♦ Solid density: 1.05-1.25 g/cm⊃3;
♦ Shrinkage: 3.72-4.24%
♦ Tensile strength: 36-52 Mpa
♦ Curing time: 6-10 s
♦ Elongation at break: 11-20%
♦ Shelf life: 1 year